Pipe mounted strobe on a telescopic pole extends to 48". Available in single flash, double flash and quad flash models. (COMPLETE)

TP4000 Pole (ONLY)

1" Dia / 28" to 48" (telescopic), 1 lb

The best motorcycle siren & switching combination. Two 20amp switches for warning lights, plus yelp, wail, air horn and 'Phaser" modes. Can be mounted in saddlebags or other confined spaces.

5"1/4 Dx 6" W x 2" H, 4 lbs, 100 w, 11-16 vDC, 675-1633 HZ, 8 amp draw

Rubber housing for tough usage, polycarbonate bulb filters, flash patterns of 2, 3, 4 or 5 pulses, Day/Night modes.

Heads - 4.75" Dia x 2.5 L
Power Pack - 4.25" L x 2.5"W x 2.0" H
3 lb, 40 watts, 12-24 v, 5.5 amps draw max

Harley Police Tail Light Assembly with Harness

These tail lights are used on Harley Police Specials (and others). They attach under the rear license plate and are connected to the tail light wires so the bike is always identified as a police vehicle.

HARLEY DAVIDSON & OTHERS SIREN SPEAKER

100 WATT MOUNTS ON CRASH BAR, Refurbished with new parts, New Stainless steel bell, new bolts, new bracket, & new U bolts What you see is what you get.
 

Clear Driving Lights
 FOR YOUR HARLEY MOTORCYCLE & OTHERS

SHARP!!!!! These lights are so cherry that you can see the shop in the reflection on the chrome! New, old stock, 5" chrome lights with clear 7400 SEALED BEAMS.
 Twelve (12) VOLTS. MADE IN USA in  CHICAGO, IL BY UNITY! What you see is what you receive.

Red Police/Fire Lights
 FOR YOUR HARLEY MOTORCYCLE & OTHERS

SHARP!!!!! These lights are so cherry that you can see the shop in the reflection on the chrome! New, old stock, 5" chrome lights with red 4416R SEALED BEAMS with alternating flasher.
 Twelve (12) VOLTS. MADE IN USA in  CHICAGO, IL BY UNITY! What you see is what you receive.

$270.00

FOG / DRIVING LIGHTS FOR YOUR HARLEY MOTORCYCLE & OTHERS

SHARP!!!!! These lights are so cherry that you can see the shop in the reflection on the chrome! New, old stock, 5" chrome lights with amber 4415A SEALED BEAMS. Twelve (12) VOLTS. MADE IN USA in CHICAGO, IL BY UNITY! What you see is what you receive.

• Weather resistant housing
• Interior or exterior mounting
• High intensity, STAR Generation-3 LEDs
• Synchronizing capability
• Reverse polarity protection
• Current limit protection over entire operating voltage
• 6 Customer selectable flash patterns including a Steady-On (11 Customer selectable flash patterns including a Steady-On when two DLX3s are synchronized)
• Selectable Day/Night mode
• 3’ – Five conductor wire harness
• Dimensions: 1-3/16” H x 4” W x 2” D
• Voltage: 10V - 16V DC
• Amp Draw: Less than 1 Amp
• Approvals*: SAE J595, SAE J1318, and California Title 13 for RED and BLUE (*When two DLX3’s are used as a pair)
• Colors: Amber, Blue, Clear, Red, Green