SA-380

• Compact 100-watt electronic siren amplifier
• Siren Wail, Yelp, Phaser, Manual and Air Horn tones with optional Two-Tone/HiLo Tone
• Four position rotary switch with push-button override
• PA override with attached noise-canceling microphone and PA volume control
• LED backlighting
• Horn Ring Cycler 2 (HRC2) for hands-free tone control
• DIP switch programmable
• Exposed in-line fuse
• Short circuit, high voltage and reverse polarity protection system
• Output diagnostic LED
• Enable Input or Instant On selected on DIP switch to power up siren
• Short Manual
• Mounting brackets with the siren and PA microphone
• 2" H x 6" W x 6" D
• No-hassle 5-year limited warranty

$ 275.00

$206.25

The SC-409 Commander

• 100/200-watt electronic siren amplifier with 140 amps of light control
• Programmable lever/slide switch with the flexibility to be either progressive, non-progressive, or partially progressive
• 6 face programmable auxiliary membrane switches with the option to be on/off, on/off with Video Trigger, momentary or 10 or 20 second timed momentary
• Siren Wail, Yelp, Phaser, Manual, and Air Horn tones with optional Two-Tone/HiLo sound
• Six position rotary switch and two momentary membrane switches for Manual and Air Horn override
• PA override with attached noise-canceling microphone and face mounted volume control knob
• Face and DIP switch programmable siren features
• LED Backlighting and auxiliary switches turn red when activated
• Horn Ring Cycler 2 (HRC2) for hands free siren tone control on the Cycler position on the rotary switch
• Video Trigger output automatically initiates the record on a video camera system and is activated by each position on the lever/slide switch and on programmed auxiliary switches
• Timed Override toggles the selected tone on the rotary switch up one to the next intense siren tone for 10 seconds and then toggles back to selected tone
• Sweep and Intersection modes are automatic sequences of Yelp, Phaser, and Air Horn at different speeds activated by tapping the horn ring when the rotary switch is in either the Wail, Yelp or Phaser position
• Siren Cutout/Park Kill to disable the siren when exiting the vehicle with option to disable position 3 on the lever/slide switch
• Splash resistant rubberized face with built in membrane push button switches and liquid repelling actuator flanges
• Exposed fuses on the bottom side of the siren to protect each output
• Short circuit, high voltage, and reverse polarity protection system
• Detachable wiring connectors with screw-down terminals for the siren and auxiliary outputs and heavy-duty screw-down terminals for the lever/slide switch outputs
• Mounting brackets for the siren and PA microphone
• 2-3/4" H x 6-1/8" W x 8" D
• No-hassle 5-year limited warranty

$675.00

$430.99

• Designed for single 100 watt Speaker use
• Primary tones: Wail, Yelp, Standby - (3) position rocker switch selection.
• Horn Override, push on/push off Phaser (Yelp & Wail modes) and Manual siren control in Standby mode by Momentary (3) position rocker switch selection.
• Auxiliary input for horn ring control of horn or optional HRC function
• Power output indicator for diagnostics
• Field Selectable Options: Horn Ring Cycler, Two-Tone, Tone Disable, etc.
• Dimensions: 6" W x 6" D x 2" H
• Shipping Weight: 3 lbs
• Voltage: 9-16 VDC
• Amps: 8 amps for single 100w
• Frequency: 700 - 1500 Hz

• Compact 100 watt Remote Electronic Siren Amplifier
• Motorcycle mode
• Remote switch polarity
• Wail, Yelp, Manual, Phaser, Air Horn & optional two-tone European tones
• Hands-free operation with HRC2 (Horn Ring Cycler 2) cycles through tones with vehicle horn
• All tones easily armed or disarmed with internal DIP switch
• (2) 3-position rocker switches
• Output diagnostic LED
• Field Selectable Options: Horn Ring Cycler, Two-Tone, Tone Disable, etc.
• Dimensions: 6" W x 6" D x 2" H
• Shipping Weight: 3 lbs
• Voltage: 9-16 VDC
• Amps: 8 amps for single 100w
• Frequency: 700 - 1500 Hz

• Durable 100/200 watt Electronic Siren Amplifier
• Wail, Yelp, Manual, Phaser & Air Horn tones
• 6-position rotary switch w/push-button override
• P.A. override with attached noise-cancelling microphone
• Field Selectable Options: Horn Ring Cycler, Two-Tone, Tone Disable, etc.
• Dimensions: 6-1/8" W x 5-3/8" D x 2-1/2" H
• Shipping Weight: 5-1/2 lbs
• Voltage: 9-16 VDC
• Amps: 8-16 amps
• Frequency: 700 - 1500 Hz
• Approvals: Class A, CA Title 13 &
  KKK-A-1822 for Ambulance

• 200 watt Panel Mount Remote Siren
• 6-position rotary switch w/push-button override
• Single lead connection between control head and amplifier - for vehicles with only one speaker or where dual tones are not desired
• P.A. override with attached noise-cancelling microphone
• Wail, Yelp, Manual, Phaser & Air Horn tones
• Field Selectable Options: Horn Ring Cycler, Two-Tone, Tone Disable, etc.
• Amplifier Dimensions:
  8" W x 6-3/4" D x 2-1/8" H
• Head Size:
  6-1/4" W x 1" D x 2-7/8" H
• Shipping Weight: 5-1/2 lbs
• Voltage: 11-16 VDC
• Amps: 8-16 amps
• Frequency: 700 - 1500 Hz
• Approvals: Class A, CA Title 13 &
  KKK-A-1822 for Ambulance

• Durable 14 volt 200 watt Electronic Siren Amplifier
• (2) Independent Siren Amplifiers - Dual Sound Mode
• Field Selectable Options: Horn Ring Cycler, Two-Tone, Tone Disable, etc.
• Wail, Yelp, Manual, Phaser & Air Horn tones
• 6-position rotary switch w/push-button override
• P.A. override with attached noise-cancelling microphone
• Field Selectable Options: Horn Ring Cycler, Two-Tone, Tone Disable, etc.
• Amplifier Dimensions: 8" W x 6-3/4" D x 2-1/8" H
• Head Dimensions: 6-1/4" W x 1" D x 2-7/8" H
• Shipping Weight: 6 lbs
• Voltage: 11-16 VDC
• Amps: 17 amps
• Frequency: 700 - 1500 Hz
• Approvals: Class A, CA Title 13 &
  KKK-A-1822 for Ambulance

• Compact 100/200 watt Electronic Siren Amplifier
• Wail, Yelp, Manual, Phaser & Air Horn tones
• (4) Position Rotary Switch w/Push Button Override
• Power output indicator for diagnostics
• Field Selectable Options: Horn Ring Cycler, Siren Cut-Out Polarity, Two-Tone, Tone Disable, etc.
• Dimensions:
  6-1/8" W x 5-7/8" D x 2-1/8" H
• Shipping Weight: 4-1/2 lbs
• Voltage: 9-16 VDC
• Amps: 8 amps
• Frequency: 700 - 1500 Hz
• Approvals: Class A, CA Title 13 &
  KKK-A-1822 for Ambulance

• SLIMMEST Compact Control Unit ever! Almost half the size of a regular switchbox!
• Manage up to 160 amps of control features, including lightbar, alley lights, video system, gunlock and MORE!
• (8) Push-Button switches w/LED indicators that change when activated
• Internal Programmable Option Settings to combine switches 1 & 2 for high power use or make switch 8 Momentary for quick, secure access.
• Dimensions: 6-1/8" W x 6-1/2" D x 1-3/8" H
• Shipping Weight: 2-1/2 lbs
• Voltage: 10-16 VDC
• Amps: 160 MAX amps

• Full Feature 100/200 watt Electronic Siren Amplifer with Light Control
• Rocker Switch Siren Function Control with Push Button Overrides
• (4) Position Lever Switch for up to 60 amps Primary Lighting Control
• (4) Illuminated Rockers rated for 20 amps per switch
• Wail, Yelp, Manual, Phaser & Air Horn tones
• Field Selectable Options: Horn Ring Cycler, Siren Cut-Out Polarity, Two-Tone, Tone Disable, etc.
• Dimensions:
  6-1/8" W x 5-7/8" D x 2-3/4" H
• Shipping Weight: 5-1/2 lbs
• Voltage: 9-16 VDC
  (Light Control 11-16 VDC)
• Amps: 8-16 amps
• Frequency: 700 - 1450 Hz
• Approvals: Class A, CA Title 13 &
  KKK-A-1822 for Ambulance

• Hand Held Light Control Siren
• (4)-position Slide Switch for up to 60 amps Primary Lighting Control
• Wail, Yelp, Manual, Phaser & Air Horn tones
• (6)-position Rotary Switch w/Push-Button Override
• Built in microphone for P.A. Override
• Field Selectable Options: Horn Ring Cycler, Automatic Siren Disable, Two-Tone, Tone Disable, etc.
• Amlifier Dimensions:
  7-1/2" W x 6-3/4" D x 2-1/8" H
  Hand Control Dimensions:
  2-3/4" W x 1" H x 6" D
• Shipping Weight: 5-1/2lbs
• Voltage: 11-16 VDC
• Amps: 8-16 amps
• Frequency: 700 - 1500 Hz
• Approvals: Class A & CA Title 13

• Updated Hand Control for SC-550 Light Control Siren
• Improved feel for PA PTT knob
• Light bar switch is easier to move
• Earlier SC-550-83 Light Control Sirens must be upgraded with a rectangular modular connector to use this updated SC-550-10CH Hand Control unit.
• Hand Control Dimensions:
  2-3/4" W x 1" H x 6" D
• Shipping Weight: 5-1/2 lbs